Navigation Menu

 

 

 

 

 

 

 

 

 

Boiler Fault Code Information For The Ferroli DOMIcondens HE 26 C boiler

Do you have a faulty Ferroli DOMIcondens HE 26 C boiler? Your boiler is equipped with an advanced self-diagnosis system. In case of a boiler fault, the display will flash together with the fault symbol, indicating the fault code.

Are you experiencing a fault with your boiler? If so, call our 24 hour UK call centre on 0844 272 0947. MR Boiler Repairs is the UK’s leading boiler repair and service specialist, providing support for domestic, commercial and residential properties. Our low cost fixed price repair service will provide you with peace of mind and avoid any scary repair bills.

What does your Repair and Relax Repair Include?

  • A Fixed Price Repair
  • No Call Out Fee’s
  • 2 Hour Emergency Response
  • 12 Months Boiler Breakdown Insurance*

Fault and error codes for the Ferroli DOMIcondens HE 26 C boiler

A01     No burner ignition

A02     Flame present signal with burner off, possible electrical fault

A03     Over temperature protection activation

F04     Fume thermostat fault

F05     Fan fault or fume pressure switch fault

A06     No flame after the ignition phase

F07     Card parameter

A09     Gas value fault

F10     Delivery sensor 1 fault

F11     DHW sensor fault

F14     Delivery sensor 2 fault

A16     Gas valve fault

F20     Combustion control fault

A21     Poor combustion fail

A23     Set nominal system water pressure not reached within 4 minutes

A24     4 fillings within 24 hours

F34     Supply voltage under 180V

F35     Faulty mains frequency

F37     Incorrect system water pressure

F39     External probe fault

A41     Sensor positioning

F42     Heating sensor fault

F43     Exchange protection activation

F50     Gas valve fault

A51     Poor combustion fault

Would you like a service engineer to repair your boiler, then book a boiler repair today.

There are faults that cause permanent shutdown (marked with the letter “A”): to restore operation, press the RESET button 1 second or RESET on the optional remote timer control if installed; if the boiler fails to start, it is necessary to eliminate the fault.

Faults marked with the letter “F” cause temporary shutdowns that are automatically reset as soon as the value returns within the boiler’s normal working range.

 

Ferroli Boiler Manuals / Instructions

Download a copy from our library, if your boiler is not listed Contact us and we will do our best to help you.

 

 

 

 

 

 

 

 

 

 

 

Contact Us for a Quote Now

 

 

 

 

 

 

 

 

 

 

Book Your Boiler Repair Now

 

 

 

 

 

 

 

 

 

 

Book your Boiler Service Now